Press Room, Set Up & Operate - 3rd Shift Job at US Tsubaki Automotive, LLC, Chicopee, MA

K1cvZXlKTXdsejl4cGNicFpEamx4dVpNUlE9PQ==
  • US Tsubaki Automotive, LLC
  • Chicopee, MA

Job Description

Description:

The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry.

Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description – other tasks may be assigned and expected to be performed.

  • Perform final inspection on parts when lots are completed, record lot and charge number into logbooks to ensure traceability, and position into parts baskets in proper order on the regular carts. 
  • Determine feed length and shut height of ram, and adjust miss-feed and stock thickness indicators, air or mechanical knock-out devices where ranging from 100 to 200 tons, for the purpose of blanking and piercing timing chain side plates, from coil and/or bar stock.
  • Possess basic knowledge and understanding of production tooling, which consists of multiple cavity steel and carbide dyes, understanding of related process equipment such as feeds, scrap cutters, stock straighteners, etc.
  • Obtain raw materials from storage location, utilizing FIFO, and move to temporary storage area next to machine.
  • Report all work performed on labor reporting forms as required.
  • Work from drawings, route sheets and instructions, select proper tooling, equipment and materials for the job, and remove or insert any removable sections as necessitated by individual job requirements.
  • Make necessary adjustments of press feeds. Adjust safety devices furnished as a part of the operation.
  • Secure necessary production gauges and checking devices for the specific job requirements. 
  • Determine when dyes need sharpening, or repair.
  • Diagnose and remedy malfunctions to tools and equipment. 
  • Perform first piece inspection and begin production run on parts per work and inspection standards.
  • Follow inspection standards (SPC) and perform all the required steps in the process inspection.
  • Record tool life, heat, and coil numbers, and other tractability information into control books. Store tooling and accessories into designated areas.
  • Provide for minor maintenance of equipment and preventative maintenance as specified in PM sheets.
  • Requires sufficient knowledge of mechanisms and tooling to maintain close tolerance on a variety of similar operations and work specifications.
  • Maintain work area and equipment in a clean and orderly condition and follow standard safety regulations. 
  • Detect faulty operation or defective material and report these and other unusual conditions to group leader or supervisor.
  • Perform other similar and associated duties as required or directed. 
Requirements:
  • High school diploma or equivalent preferred; equivalent relevant experience may be considered
  • 2 -5 years’ experience running multiple machines, troubleshooting, and performing preventative maintenance.
  • Safety First mindset. 
  • Strong focus on Quality.
  • Ability to work well in a team environment. 
  • Ability to work in a fast-paced environment.
  • Must have good mechanical aptitude and problem-solving skills.
  • Ability to use material handling devices such as hand trucks, and hydraulic lift trucks.
  • Ability to read and comprehend simple instructions, short correspondence, and memos.
  • Ability to write simple correspondence.
  • Ability to effectively present information in one on one and small group situations to customers, clients, and other employees of the organization.
  • Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
  • Basic computer Skills. 

Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability

PM21

Compensation details: 24.29-26.92 Hourly Wage

PId0898aa197a5-30492-40517731

Job Tags

Hourly pay, Temporary work

Similar Jobs

Renew Accident & Injury Chiropractic Clinic

Associate Chiropractor Job at Renew Accident & Injury Chiropractic Clinic

Associate Chiropractor wanted to step in and lead an experienced team of CAs and LMTs in Portland's Hollywood district. Job Details: Part time hours are available during onboarding, transitioning to full time when the new DC is ready. Partnership is also a possibility...

Insight Global

Instructor Job at Insight Global

 ...Position: Instructor Duration: 2year contracttohire Location: Auburn Hills, MI (up to 50% travel across North America) Schedule: 8hour days / 4 days per week Start Time: 7:30 AM (classes begin at 8:00 AM) MUST HAVES Strong technical aptitude... 

Thompson Hine LLP

Controller Job at Thompson Hine LLP

 ...consistently recognized for its commitment to Innovation, Inclusion, collaborative culture, is seeking a strategic and results-driven Controller to join our Cleveland office. This individual has a key leadership role offering the opportunity to partner closely with... 

Akkodis

PCB Design Engineer Job at Akkodis

 ...Akkodis is seeking a PCB Design Engineer for a Direct Hire position with a client located in Huntsville AL. Ideally looking for a candidate with a background in Aerospace Industry. Salary Range: $130K/yr - $160K/yr (The range may be negotiable based on experience, education... 

Great Clips

Hair Stylist Job at Great Clips

 ...Great Clips Carpenter Crossings Ypsilanti, MI Now Hiring Licensed Stylists $30$40+/hour Average Earnings (Hourly + Tips + Bonuses + Commissions)$1,000 Sign-On Bonus for Full-Time Flexible Stylists Looking for a busy salon where you can maximize your income...